Mounting components for filter plate pack

Overview

The tower press includes a number of mounting components that ensure the reliability of the filter regardless of the application. The high level of requirements and conditions have been taken into account in the design and manufacture of mounting components, not forgetting the surface quality.

Suspension Plates

The main function of the suspension plates is to allow the vertical movement of the plate pack. The suspension plates must withstand a mass of several tons in a round-the-clock process. Material selections have been made based on FEM calculations, which have made it possible to determine service life based on fatigue strength. We do not compromise on security. Roxia suspension plates are made of duplex steel and machined to the most suitable surface roughness that achieves advanced safety results.

Roxia offers a wide range of suspension plates for different filter sizes and types.

Sliding pieces and accessories

The horizontal movement of the plate pack is limited by slide pieces. It is an important component for the operation, helping the plate pack to operate flawlessly. The purpose of the slide piece is to hold the filter plate in its designated location during the process. The slide pieces slide along the guide, in which case the slide piece is expected to be durable. Roxia mainly uses UHMW-PE plastic, which has increased wear and abrasion resistance and a very low coefficient of sliding friction, even at low temperatures. The slide piece is adjusted with an eccentric nut, made of acid resistant steel. Roxia’s product range includes mounting components for large and small filters.

Contact for more information

Suspension Plates

Roxia offers a wide range of suspension plates for different filter sizes and types.

Spare part Plate Seals for Tower Presses

The main purpose of filter plate seals is to tightly seal off the tower press filtration chambers. If the sealing …

Spare part Complete plate packs

With extensive experience from the field and filtration technology developments, Roxia filtration experts have re-engineered complete plate packs for tower …

Spare part Filter cloths

A wide range of Roxia filter cloths for tower press filters enables choosing the right type of cloth for any …

Spare part Rubber Diaphragms

Roxia rubber diaphragms for tower press filters combine professional moulding manufacturing and benefits of more than 40 years of experience …

Spare part Filter plates and filter frames

The heart of every tower press is filter plates and filter frames. Based on best practice and years of experience, …

Spare part Rollers and scrapers

Roxia rollers are made according to the latest design. Double radial shaft seal and chromium plating make rollers and scrapers …

Spare part Mounting components for filter plate pack

The tower press includes a number of mounting components that ensure the reliability of the filter regardless of the application. …

Spare part Hydraulics

Roxia spare parts for hydraulics for tower press filters and entire hydraulic systems. Hoses, seal kits, valves, hydraulic cylinders are …

Spare part Feed hoses for complete filter plate pack

Roxia hoses are used in tower press filters for slurry feed, filtrate, pressing air and pressing water. They are designed …

Spare part Filter Vats

Roxia filtrate vats are important constructional components in big tower press filter plates. Their primary function is to support filter …

Spare part Grids

Roxia filter grids for tower press filters have a longer lifetime because they are made from polypropylene with higher, up …

Mounting components for filter plate pack

Carefully designed components for challenging conditions

Precisely selected materials when safety and product life cycle in question

Committed to strict quality standards

Suspension Plates

Sliding pieces and accessories

Suspension Plates

Spare part Plate Seals for Tower Presses

Spare part Complete plate packs

Spare part Filter cloths

Spare part Rubber Diaphragms

Spare part Filter plates and filter frames

Spare part Rollers and scrapers

Spare part Mounting components for filter plate pack

Spare part Hydraulics

Spare part Feed hoses for complete filter plate pack

Spare part Filter Vats

Spare part Grids

Spare part Didn’t find what you were looking for?

Let’s talk and find the best solution for your business!

Select your location

Select field

Contact us

Kauko Tanninen

Retha Schoeman

Dan Stenglein

Sebastian Alcaino

Ronald Gaspar

Sun Lin

Roope Kupias

Dirk Otto

Thorsten Zogalla

Klaus Göde

Ian Mayhew

Markus Saloniemi

Goran Metiljevic

Petteri Taavitsainen

What’s new in dewatering, environmental technologies and industrial automation?