Roxia treats difficult leachate and reject waters in Lappeenranta

Roxia has been the reliable partner for Etelä-Karjalan Jätehuolto Oy (EKJH) for many years. EKJH is responsible for collecting and utilizing municipal waste of nine municipalities in the South Karelia region.

EKJH waste management facility has a new biogas plant that produces biogas from biowaste and municipal wastewater sludge. All wastewaters in the facility area are collected in an equalization basin before being pumped into the municipal sewage network and further to a municipal wastewater treatment plant. The wastewaters are from various sources including leachate from the close by landfill areas, reject water from the biogas plant and process waters from a composting facility. In the springtime, runoff meltwater has a considerable effect on the quality and quantity of the collected wastewater.

The biogas plant reject water has a very high load and is not acceptable to be treated in the municipal wastewater treatment plant as such. Therefore, the need for an agile on-site treatment process arose.

Having supplied automation and modernization for wastewater pumping and aeration for the equalization basin, Roxia was already familiar with the water management system and processes on the facility premises. Floating aerators keep the basin ice-free during winter and prevent odours during summertime.

Roxia started to investigate a suitable solution with laboratory-scale testing. A process which transforms colloid solids into easily separable form with chemical treatment and subsequently separates the solids with flotation was found suitable. Economically feasible treatment removed over 90% of the load in the laboratory tests.

Real-life experiences with full-scale pilot

After the laboratory-scale testing, it was time to do a full-scale on-site pilot study. Roxia’s pilot plant was built in sea containers and included transfer pumping, chemicalization, flotation and sludge dewatering units. The automated pilot plant was equipped with remote monitoring and control system. This kind of agile and fast commissioned pilot plant enables the demonstration of the treatment process on large scale and in different sites.

The pilot plant treated wastewater continuously and the cleaned water was led directly to the pumping station to be pumped to the sewer network. This enabled remediation of the challenging water situation already during the piloting phase. The results matched those of laboratory testing with over 90% reduction in load in continuous operation. The sludge produced in the process was dewatered using Roxia Geobox™ geotextile filtration.

Roxia floating aerators keep the equalization basin ice-free during wintertime and the water treatment plant pre-treats wastewater to be eligible for municipal treatment. Containerized wastewater treatment plant is easy to deliver, install and commission. It can be easily relocated later, if necessary.

Agile delivery and commissioning of a containerized wastewater treatment plant

The delivery and commissioning of the actual wastewater treatment plant took place at the beginning of 2022. The installation of the containers was quick and in addition, only the intermediate piping and electrical work were needed. After installation works the process start-up and adjustment could be done in one day. The automated process and continuous support from Roxia ensure the continuity and effectiveness of the treatment even though the wastewater is a very challenging type and its quality and quantity vary hour by hour. Water leaving for the municipal wastewater treatment is now of considerably better quality and it is now acceptable for final treatment without problems. The sludge from the treatment process is pumped to the nearby composting facility.

Roxia experts take care of the wastewater treatment plant and can monitor and control the process remotely with Roxia Malibu™ portal. EKJH has trusted Malibu with pumping station automation and aerators for years. Remote monitoring and various automated alarm messages and reporting tools save a considerable amount of work hours and reduce logistics on-site.

Let’s talk and find the best solution for your business!

  • Select your location

  • Select field

Contact us

If you have something on your mind, just let us know! We are more than happy to answer all your inquiries.

Name(Required)
Hidden

Kauko Tanninen

President Central Asia

+7 708 102 24 66

Sergey Petukhov

Technical Director Central Asia

+7 916 213 21 76

Retha Schoeman

Sales Engineer Sub Saharan Africa and South Africa

+27 83 825 6805

Dan Stenglein

Sales Director North America

+1 667 500-2591

Sebastian Alcaino

Regional Sales Director South and Central America

+56977685284

Ronald Gaspar

Area Sales Manager South and Central America

+51 9 7973 5424

Sun Lin

Area Sales Manager, General Manager China

+86 21 52679628

Roope Kupias

Customer Support Manager, Finland

+358 40 860 4720

Dirk Otto

Sales Director, Central Europe

+49 (0) 2102 420 707

Thorsten Zogalla

Area Sales Manager SFP Filters, Central Europe

+49 7307 92170 116

Klaus Göde

Service Engineer, Central Europe

+49 (0) 162 408 88 58

Kimmo Angeria

Head of Field Services, Industrial Automation

+358 400 104 977

Ian Mayhew

Filter Spares Sales and Service Manager North America

+1 667 668 0006

Markus Saloniemi

Director, Industrial Automation

+358 40 571 9520

Goran Metiljevic

Product Manager, Powerflo Solutions

+61 2 8005 2131

Petteri Taavitsainen

Sales Director, Scandinavia, Baltics, Turkey, Middle East, India, Japan, Australia & Oceania

+358405071107