Full Filter Press Refurbishment

Boliden’s zinc smelter in Kokkola, Finland, is the second largest in Europe. More than 20 filters are used for zinc filtration and four of them needed to be checked, refurbished, and upgraded to meet the nowadays operation and safety requirements.

Products & Solutions

Project overview

  • Customer & application: Boliden Kokkola, Zinc production
  • Task: Modernisation and safety upgrade of four horizontal filter presses, type Novatek MKAF1200
  • Results: Extended reliable filter press operation and high capacity with improved safety.

Boliden Goes for Maximum Safety and Improved Performance

The four horizontal press filters have been in operation since 1997. To keep them in top shape and as safe as possible, Boliden Kokkola) decided to modernise them. The filter type is Novatek MKAF1200.

For us, it made the most sense to give the modernisation of old filters to a company who has the knowledge of the equipment.

– Juha Hakala, Mechanical Maintenance Manager, Boliden Kokkola.

Roxia handled a filter refurbishment at Boliden Kokkola. Image after the modernization.

Filter Refurbishment Phase

Roxia handled planning, resourcing, and scheduling for the refurbishment of all four filters and proved to be a trustworthy partner also when it comes to filtration. “Installation and commissioning have gone as planned on all filters and did not have any significant impacts to the ongoing filtration process,” states Janne Korkiakangas, Project Engineer, Boliden Kokkola. The filters were refurbished according to the customer’s wishes: one after another, starting in May 2020 and finishing in October 2021.


After the modernisation: among others, refurbishment included transparent sliding door and plate washing device.

New Roxia plate shifter and cloth washing device makes filter operation more reliable and brings better process results.

The upgrade included the following key components:

  • Replacing safety curtains with transparent sliding doors including safety interlocks.
  • Mild steel plate hangers were replaced with stainless steel.
  • Replacing automation system with new Siemens automation with modern safety features.
  • Installation of improved plate shifter and cloth washing device.
  • New pneumatic control cabinets for valves.
  • Entire refurbishment of hydraulic cylinders.

As planned, refurbishment of each filter press took about two weeks. “Actually, three filter presses were refurbished faster than the first one. As with any project, there were some challenges in the installation phase, but nothing that could not have been resolved along the way. We did our best to finish the project as planned, causing no delays to Boliden Kokkola,” adds Petri Viskari, Project Manager, Roxia. Planning, resourcing, and scheduling have worked smoothly and cooperation during the project was flexible.


New Roxia plate shifter and cloth washing device makes filter operation more reliable and brings better process results.

Roxia provided completely new Siemens automation solution for all four filter presses.

Safety Improvements

Because the filter presses date back to 1997, customer’s requirement was to revise safety features and update them to today’s safety standards. After careful safety review, Roxia suggested to improve the perimeter safety and new industrial automation system.

An important safety improvement was new control system. The old system was outdated and needed to be replaced. Earlier, only a single component failure could have stopped the whole filter, because some parts are simply no longer available.

The new Siemens automation system is more reliable, has better user interface, improved safety features offering better plant field automation and all components are easily available. Since 1997, the technology has rapidly developed and among the rest, brought safety improvements which are nowadays standard in such systems. Overall, Roxia delivered a complete modern automation solution including hardware, instrumentation, and software.


Roxia provided completely new Siemens automation solution for all four filter presses.

Before the refurbishment the black curtain in the far-left corner was all that used to separate the filter process from the surroundings.

Perimeter Protection for Better Operator’s Safety

Another important safety feature was newly installed perimeter protection. It replaced old safety curtains with safety interlocked doors that prevent access to the possibly hazardous areas during the filter’s operation. When any of the doors open, the filter automatically stops. At the same time, it still allows enough room for safe maintenance and operator can see filter operation through transparent doors.

After revised and upgraded safety features, they protect the operators and the filters from failures and unintended misuse.


Before the refurbishment the black curtain in the far-left corner was all that used to separate the filter process from the surroundings.

Our customer: Boliden Kokkola

Boliden’s smelter Kokkola, located on the west-coast of Finland, is the second largest zinc smelter in Europe and the largest industrial employer in Kokkola.

The total amount of zinc products in the portfolio is about 40, containing both pure zinc and tailored products for certain customers and customer segments. Zinc is used in cars, bridges, batteries, light poles, construction – in everything that our modern lifestyle requires.

Let’s talk and find the best solution for your business!

  • Select your location

  • Select field

Contact us

If you have something on your mind, just let us know! We are more than happy to answer all your inquiries.

Name(Required)
Hidden

Kauko Tanninen

President Central Asia

+7 708 102 24 66

Sergey Petukhov

Technical Director Central Asia

+7 916 213 21 76

Retha Schoeman

Sales Engineer Sub Saharan Africa and South Africa

+27 83 825 6805

Dan Stenglein

Sales Director North America

+1 667 500-2591

Sebastian Alcaino

Regional Sales Director South and Central America

+56977685284

Ronald Gaspar

Area Sales Manager South and Central America

+51 9 7973 5424

Sun Lin

Area Sales Manager, General Manager China

+86 21 52679628

Roope Kupias

Customer Support Manager, Finland

+358 40 860 4720

Dirk Otto

Sales Director, Central Europe

+49 (0) 2102 420 707

Thorsten Zogalla

Area Sales Manager SFP Filters, Central Europe

+49 7307 92170 116

Klaus Göde

Service Engineer, Central Europe

+49 (0) 162 408 88 58

Kimmo Angeria

Head of Field Services, Industrial Automation

+358 400 104 977

Ian Mayhew

Filter Spares Sales and Service Manager North America

+1 667 668 0006

Markus Saloniemi

Director, Industrial Automation

+358 40 571 9520

Goran Metiljevic

Product Manager, Powerflo Solutions

+61 2 8005 2131

Petteri Taavitsainen

Sales Director, Scandinavia, Baltics, Turkey, Middle East, India, Japan, Australia & Oceania

+358405071107